sE Electronics DM2 Dynamite Microphone Preamplifier for rent in Almaty
- Active microphone preamplifier;
- amplification class: A;
- for passive ribbon and dynamic microphones;
- gain: 15 or 30 dB;
- input and output: XLR;
- powered by phantom power.
- Active microphone preamplifier;
- amplification class: A;
- for passive ribbon and dynamic microphones;
- gain: 15 or 30 dB;
- input and output: XLR;
- powered by phantom power.
-
1 shift
2500 i
shift
-
3 shift
6750 i
2250i / shift
-
14 shift
26250 i
1875i / shift
-
30 shift
52500 i
1750i / shift
-
6 hours
1750 i
half shift
Enter a value between 1 and 60
Headphones
- Frequency range
- Hz
Microphone parameters
- Frequency range
- Hz
The sE Electronics DM2 TNT is an active microphone preamp with 2 gain settings and 8 impedance settings. It amplifies the signal up to 30 dB.
The DM2 TNT allows you to select 15dB or 30dB gain. The ultra-high impedance input offers eight switchable load impedance settings ranging from 50 ohms to 10 megohms, allowing the preamp to adapt to a wide range of microphones (excluding condenser microphones and active ribbon microphones).
The preamp uses Class A FET circuitry for studio-quality recording. The device runs on phantom power supplied through a gold-plated XLR connector. However, keep in mind that the preamp is designed for passive microphones only. It will not work with active ribbon or condenser microphones, which require phantom power to operate.